|
|
|
|
|
|
Danco 65884B Water Heater Washer, 13/16 in ID x 1 in OD 3/32 in D, Synthetic Rubber
|
|
|
Designed to be used with a 3/4" diameter supply connector to seal the connection. 13/16 x 1"
|
|
|
|
|
|
|
|
|
|
Danco 88493 Water Heater Washer, Rubber
|
|
|
Water heater supply line washer.
|
|
|
|
|
|
|
|
|
|
Campco 11523 Water Heater Drain Valve, 3/4 in, MPT x Male Hose Thread, Plastic Body
|
|
|
Permanent installation, fits directly into water heater for easy draining. 2-1/2" length.
|
|
|
|
|
|
|
|
|
|
Camco 11061 Flared Water Inlet Dip Tube With Gasket, 52 in Vertical, PEX
|
|
|
Anti-siphon hole breaks damaging siphon action. Can be cut to desired length. Made of PEX. With gasket.
|
|
|
|
|
|
|
|
|
|
Camco 07133 Universal Element Gasket Kit
|
|
|
Everything needed to install flat, screw-in and universal flange elements. Contains: (1) screw-in gasket, (1) universal flange gasket, (1) four hole gasket and (4) 1/4" - 20 x 3/4" hex bolts.
|
|
|
|
|
|
|
|
|
|
B & K 168-003NL Dielectric Pipe Union, 1/2 in, FPT x C, 250 psi, Brass, Galvanized, 180 deg F
|
|
|
Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
|
|
|
|
|
|
|
|
|
|
B & K 168-004NL Dielectric Pipe Union, 3/4 in, FPT x C, 1.88 in L, 250 psi, Brass, Galvanized, 180 deg F
|
|
|
Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
|
|
|
|
|
|
|
|
|
|
Camco 10623 Dielectric Nipple, 3/4 in, MPT, 2-1/2 in L
|
|
|
For water heater inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 2-1/2" length.
|
|
|
|
|
|
|
|
|
|
B & K 167-004NL Dielectric Pipe Union, 3/4 in, MPT x C, 1-3/4 in L, 250 psi, Brass, Galvanized, 180 deg F
|
|
|
Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
|
|
|
|
|
|
|
|
|
|
Mueller 102-816 Water Heater Drain Valve, 1-1/4 in, MPT x Male Hose Thread, 125 psi, Plated Steel Canopy Handle
|
|
|
1-1/4" shank length. Heavy brass construction. Neoprene seal disc. 3/4" hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7.
|
|
|
|
