|
|
|
|
|
|
Closetmaid 71016 Shelf Organizer End Cap, 1/4 in L x 0.4 in W x 0.4 in D, Plastic
|
|
|
Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving.
|
|
|
|
|
|
|
|
|
|
SuperSlide 5629 Closet Rod Support, 5-3/4 in L x 0.87 in W x 3.87 in D, Resin, White
|
|
|
SuperSlide shelving and hardware allows hangers to slide freely on both Fixed Mount and ShelfTrack mounting systems. Hangers slide without interruption. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin
|
|
|
|
|
|
|
|
|
|
Closetmaid 6713 Shoe Support Bracket, 6-1/4 in L x 1-1/4 in W x 4-3/4 in D, Resin, White
|
|
|
For wire shelving, converts almost any wire shelf to a shoe shelf. Make a shoe shelf by inverting shelf, lip facing up. Holds shoes away from wall at an angle. Use 1 shoe support bracket every 24 in. Does not work with Close Mesh shelving. 6.125"H x 1.25"W x 4.75"D.
|
|
|
|
|
|
|
|
|
|
SuperSlide 75638 Closet Rod End Cap, 1/2 in Dia x 1/2 in L x 1/2 in W, Resin, White
|
|
|
For use with ClosetMaid, SuperSlide wire shelving. Prevents hangers from sliding off end of closet hang rod. Insert into end of the hang rod.Two end caps per package. 0.5"H x 0.5"W x 0.5"D. Material: Resin.
|
|
|
|
|
|
|
|
|
|
Closetmaid 7540 Small End Cap, Plastic, White
|
|
|
Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving.
|
|
|
|
|
|
|
|
|
|
SuperSlide 25633 Corner Corner Round Bar, 3/4 in L x 10-1/4 in W x 10-1/4 in D, Steel, White
|
|
|
Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Tapered ends slide easily into ClosetMaid, SuperSlide hang rods. Support connection of hang rod with a Hang Bar Support. 0.75?H x 10.25?W x 10.25?DMaterial: Epoxy coated steel.
|
|
|
|
|
|
|
|
|
|
SuperSlide 2058 Closet Rod, 5/8 in Dia x 72 in L, Steel, White
|
|
|
Snaps into the Closet Rod Support to allow hangers to slide without interruption. Can be cut to customize length . Holds up to 30lbs per foot. Material: Epoxy coated steel.
|
|
|
|
|
|
|
|
|
|
Rd 3/4inx4ft Tb Wht Epxy - Case of 12
|
|
|
Snaps into the Closet Rod Support to allow hangers to slide without interruption. Can be cut to customize length . Holds up to 30lbs per foot. Material: Epoxy coated steel.
|
|
|
|
|
|
|
|
|
|
Basket Hanging Steel White - Case of 6
|
|
|
17 in. wide hanging basket instantly creates additional storage. Hang multiple baskets. This sturdy wire bin does not need additional hardware; hooks directly to shelf. Perfect to use under the 24 in. or wider wire shelves. Fits any wire shelving. Material: Epoxy coated steel.
|
|
|
|
|
|
|
|
|
|
Endcap Shelf & Rod White - Case of 50
|
|
|
These end caps cover both ends of 0 gauge wire of ClosetMaid - Shelf & Rod ventilated shelving. End caps keep hangers from sliding off exposed ends. 0.5"H x 2"W x 0.5"D
|
|
|
|
