|
|
|
|
|
|
HINGE DOOR 3IN 5/8 RC BRASS
|
|
|
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included.
|
|
|
|
|
|
|
|
|
|
HINGE DOOR 3IN 1/4RC BRASS
|
|
|
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
|
|
|
|
|
|
|
|
|
|
HINGE DOOR 3IN SQ CNR BRASS
|
|
|
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors.
|
|
|
|
|
|
|
|
|
|
DOOR HINGES 3IN BRS TONE
|
|
|
National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 6 Holes, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors
|
|
|
|
|
|
|
|
|
|
DOOR HINGES 3IN BRS TONE
|
|
|
National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors
|
|
|
|
|
|
|
|
|
|
DOOR HINGES 3IN BRS TONE
|
|
|
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
|
|
|
|
|
|
|
|
|
|
DOOR HINGES 3IN ZINC (HPCE)
|
|
|
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
|
|
|
|
|
|
|
|
|
|
DOOR HINGES 3IN ZINC (HPCE)
|
|
|
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
|
|
|
|
|
|
|
|
|
|
HINGE DOOR 3-1/2 5/8 RC BRASS
|
|
|
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included.
|
|
|
|
|
|
|
|
|
|
HINGE DOOR 3-1/2IN SQ CNR BRS
|
|
|
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors.
|
|
|
|
