|
|
|
|
|
|
PLATE T STEEL 4X4IN ZINC PLTD
|
|
|
Use #8 flat head screws. Designed to join two pieces of wood together at 90 degree angles, such as on screens and frames. Screw holes are countersunk. Drill a pilot hole with a 3/32" sized drill bit when using wood screws.
|
|
|
|
|
|
|
|
|
|
TPLATES 4X4IN BLK FINISH
|
|
|
Use #8 flat head screws. Designed to join two pieces of wood together at 90 degree angles, such as on screens and frames. Screw holes are countersunk. Drill a pilot hole with a 3/32" sized drill bit when using wood screws.
|
|
|
|
|
|
|
|
|
|
TPLATES 3X3IN ZN PLT
|
|
|
National Hardware T Plate, Series: V116, 3 in Length, 3 in Width, 0.07 in Thickness, 3 Mounting Holes, 1/4 in Diameter Mounting Hole, Steel, Zinc Plated, BHMA A138.18
|
|
|
|
|
|
|
|
|
|
TPLATES 6X5IN BLK FINISH
|
|
|
Use 3/8" bolts and/or 16d nails. Used to support the joining of a cross beam with a support beam by application to the side. FoUr superior strength plates should be used on both sides of the joint with through bolts.
|
|
|
|
|
|
|
|
|
|
TPLATES 4X4IN ZN PLT
|
|
|
National Hardware T Plate, Series: V116, 4 in Length, 4 in Width, 0.07 in Thickness, 3 Mounting Holes, 1/4 in Diameter Mounting Hole, Steel, Zinc Plated, BHMA A138.18
|
|
|
|
|
|
|
|
|
|
Prosource JC-A01-PS Appliance Casters, Dual Wheel, 120 Lbs
|
|
|
White, plastic wheel. Zinc plated finish. 7/8" x 2".
|
|
|
|
|
|
|
|
|
|
TPLATES 12X8X1/8IN BLK
|
|
|
Used to support the joining of a cross beam with a support beam by application to the side. Four superior strength plates should be used on both sides of the joint with through bolts.
|
|
|
|
|
|
|
|
|
|
TPLATES 12X12X3/16IN BLK
|
|
|
Used to support the joining of a cross beam with a support beam by application to the side. Four superior strength plates should be used on both sides of the joint with through bolts.
|
|
|
|
|
|
|
|
|
|
Plate T Steel 3x3in Zinc Pltd - Case of 20
|
|
|
Reinforces flat surface joints, seams and cracks. Can be used to repair furniture.
|
|
|
|
|
|
|
|
|
|
Plate T Steel 3x3in Zinc Pltd - Case of 20
|
|
|
Use #8 flat head screws. Designed to join two pieces of wood together at 90 degree angles, such as on screens and frames. Screw holes are countersunk. Drill a pilot hole with a 3/32" sized drill bit when using wood screws.
|
|
|
|
