|
|
|
|
|
|
3M Wetordry 9088NA Wet/Dry Sand Paper?, 11 in x 9 in, Assorted Grit
|
|
|
Sharp, synthetic, silicon carbide cuts fast to dry or wet sand between coats of varnish, paint, and other finishes; or to sand metal for repainting or prior primer coat. Use with water to reduce clogging and extend abrasive life.
|
|
|
|
|
|
|
|
|
|
3M Wetordry 9085NA Wet/Dry Sand Paper?, 11 in x 9 in, 400 Grit
|
|
|
Sharp, synthetic, silicon carbide cuts fast to dry or wet sand between coats of varnish, paint, and other finishes; or to sand metal for repainting or prior primer coat. Use with water to reduce clogging and extend abrasive life.
|
|
|
|
|
|
|
|
|
|
3M Wetordry 9086NA Wet/Dry Sand Paper?, 11 in x 9 in, 320 Grit
|
|
|
Sharp, synthetic, silicon carbide cuts fast to dry or wet sand between coats of varnish, paint, and other finishes; or to sand metal for repainting or prior primer coat. Use with water to reduce clogging and extend abrasive life.
|
|
|
|
|
|
|
|
|
|
3M Wetordry 9087NA Wet/Dry Sand Paper?, 11 in x 9 in, 220 Grit
|
|
|
Sharp, synthetic, silicon carbide cuts fast to dry or wet sand between coats of varnish, paint, and other finishes; or to sand metal for repainting or prior primer coat. Use with water to reduce clogging and extend abrasive life.
|
|
|
|
|
|
|
|
|
|
3M Wetordry 9084NA Wet/Dry Sand Paper?, 11 in x 9 in, 600 Grit
|
|
|
Sharp, synthetic, silicon carbide cuts fast to dry or wet sand between coats of varnish, paint, and other finishes; or to sand metal for repainting or prior primer coat. Use with water to reduce clogging and extend abrasive life.
|
|
|
|
|
|
|
|
|
|
SANDPAPER GRIP 60 9X11IN 4SHT
|
|
|
Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
|
|
|
|
|
|
|
|
|
|
SANDPAPER GRIP 80 9X11IN 4SHT
|
|
|
Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
|
|
|
|
|
|
|
|
|
|
SANDPAPER GRIP 120 9X11IN 4SHT
|
|
|
Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
|
|
|
|
|
|
|
|
|
|
SANDPAPER GRIP 150 9X11IN 4SHT
|
|
|
Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
|
|
|
|
|
|
|
|
|
|
SANDPAPER GRIP 220 9X11IN 4SHT
|
|
|
Can be used on a wide range of surfaces including paint, wood, metal, plastic and fiberglass. No slip grip backing. Sharp and synthetic minerals cut fast, stay sharp and resist clogging. Can be used by hand, on a sanding block.
|
|
|
|
