|
|
|
|
|
|
Louisville FS4006 Commercial Step Ladder, 225 lb, 3 in Non-Conductive Rail
|
|
|
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA.
|
|
|
|
|
|
|
|
|
|
Werner 5906 Single Sided Step Ladder, 225 lb, 3 in, 3-1/8 in Front X 1-3/4 in Rear
|
|
|
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps.
|
|
|
|
|
|
|
|
|
|
Werner 5904 Single Sided Step Ladder, 225 lb, 3 in, 3-1/8 in Front X 1-3/4 in Rear
|
|
|
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps.
|
|
|
|
|
|
|
|
|
|
Louisville FS4004 Commercial Step Ladder, 225 lb, 3 in Non-Conductive Rail
|
|
|
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA.
|
|
|
|
|
|
|
|
|
|
LADDER STEP FBRGLS TYPE1 4FT
|
|
|
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
|
|
|
|
|
|
|
|
|
|
Werner 6000 Step Ladder, 250 lb, 3 in, 3-1/8 in Front X 1-3/4 in Rear
|
|
|
Molded top provides large standing platform. Slip-resistant traction-tred steps. Plated steel braces on bottom steps. Combinations rail end shield and foot with slip-resistant foot pad. External pinch-proof spreaders. Dimensions: 5-5/8" x 12-3/8" top; 3" steps; 3-1/8" wide front rails; 1-1/8" wide front flange; 1-3/4" wide rear rails; 1-3/16" wide and 5/8" wide in front.
|
|
|
|
|
|
|
|
|
|
Louisville FS2006 Commercial Step Ladder, 250 lb, 3 in Non-Conductive Rail
|
|
|
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
|
|
|
|
|
|
|
|
|
|
Werner 6005 Single Sided Step Ladder, 250 lb, 3 in, 3-1/8 in Front X 1-3/4 in Rear
|
|
|
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3".
|
|
|
|
|
|
|
|
|
|
Werner 6200 Single Sided Step Ladder, 300 lb, 4 in, 3-1/8 in Front X 1-3/8 in Rear
|
|
|
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental.
|
|
|
|
|
|
|
|
|
|
Werner 6006 Single Sided Step Ladder, 250 lb, 3 in, 3-1/8 in Front X 1-3/4 in Rear
|
|
|
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3".
|
|
|
|
