|
|
|
|
|
|
Werner D716-2 Multi-Section Extension Ladder, 200 lb, 1-1/4 in, 2-1/2 in I-Beam Rail
|
|
|
Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam side rails. Fixed aluminum lock allows push up height adjustment. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. U.L. Listed. Meet ANSI Code. Dimensions: Side rails 2-1/2" wide; Flange 3/4" wide; Rungs 1-1/4" wide; Base width 15-3/4" outside rails. Length of extension ladders when not extended is half the total length of the sections.
|
|
|
|
|
|
|
|
|
|
Louisville L-2324 Extension Ladder, 200 lb, 8 ft, 95 in
|
|
|
Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley.
|
|
|
|
|
|
|
|
|
|
Werner D1116-2 Multi-Section Extension Ladder, 200 lb, 1-1/2 in, 2-3/4 in I-Beam Rail
|
|
|
Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide; Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections.
|
|
|
|
|
|
|
|
|
|
Werner D1120-2 Multi-Section Extension Ladder, 200 lb, 1-1/2 in, 2-3/4 in I-Beam Rail
|
|
|
Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections.
|
|
|
|
|
|
|
|
|
|
Louisville L-2324 Extension Ladder, 200 lb, 10 ft, 95 in
|
|
|
Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley.
|
|
|
|
|
|
|
|
|
|
Louisville AE4216PG 2-Section Extension Ladder, 225 lb, 3 in I-Beam Rail
|
|
|
QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley.
|
|
|
|
|
|
|
|
|
|
Werner D1200-2 Compact Multi-Section Telescoping Extension Ladder, 225 lb, 1-3/4 in, 3 in
|
|
|
Compact design retracts to 6'3". Twist-Proof due to the Alflo rung joints. Mar-resistant end caps. Heavy duty modified I-Beam side rails. 1-3/4" Slip-resistant Traction-Tred D-rungs. Durable extruded rung locks are spring loaded to operate smoothly. Convenient carry handle. Overlapping rung location for improved foot comfort. Use indoors or outdoors. Easy to maneuver around corners and through doors. Durable shoe rest flat on slip resistant pad or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1"; Base width 17-3/8" outside rails.
|
|
|
|
|
|
|
|
|
|
Werner D1220-2 Multi-Section Extension Ladder, 225 lb, 1-3/4 in, 3 in Interlocking Rail
|
|
|
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
|
|
|
|
|
|
|
|
|
|
Louisville L-2324 Extension Ladder, 200 lb, 12 ft, 95 in
|
|
|
Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley.
|
|
|
|
|
|
|
|
|
|
Louisville AE4220PG 2-Section Extension Ladder, 225 lb, 3 in I-Beam Rail
|
|
|
QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley.
|
|
|
|
