|
|
|
|
|
|
SWITCH CHAIN PULL NKL 6A 125V
|
|
|
|
|
|
|
|
|
|
|
|
|
Eaton Wiring Devices BP458NP-SP Canopy Switch with Bell End, Lead Wire Terminal, 1/3/6 A, 125/250 V
|
|
|
UL listed (file no.E18704). Meets all CSA requirements, C22.2 no.111. For use in fixtures, appliances and equipment. Shank is threaded 15/32 in - 32 x 15/32 in long. Keyed shank, hex nut and finishing nut furnished. 6 wire lead terminals, number 18, stripped 3/4 in. With end bell.
|
|
|
|
|
|
|
|
|
|
Eaton Wiring Devices BP460-SP-L Canopy Switch with Bell End, Lead Wire Terminal, 3/6 A, 125/250 V
|
|
|
UL listed (file no.E18704). Meets all CSA requirements, C22.2 no.111. For use in fixtures, appliances and equipment. Shank is threaded 15/32 in - 32 x 15/32 in long. Keyed shank, hex nut and finishing nut furnished. 6 wire lead terminals, number 18, stripped 3/4 in. With end bell.
|
|
|
|
|
|
|
|
|
|
SWITCH CANOPY PBTN 1P MTL NIC - Case of 10
|
|
|
UL listed (file no.E18704). Meets all CSA requirements, C22.2 no.111. Wide variety of sizes for use in fixtures, appliances and equipment. Shank is threaded 15/32 in - 32 x 15/32 in long. Keyed shank, hex nut and finishing nut furnished. 6 wire lead terminals, #18 stripped 3/4 in. Temperature rating from -40 to 65 deg C.
|
|
|
|
|
|
|
|
|
|
SWITCH CANOPY PULLCHAIN 1P NIC - Case of 10
|
|
|
UL listed (file no.E18704). Meets all CSA requirements, C22.2 no.111. For use in fixtures, appliances and equipment. Shank is threaded 15/32 in - 32 x 15/32 in long. Keyed shank, hex nut and finishing nut furnished. 6 wire lead terminals, number 18, stripped 3/4 in. With end bell.
|
|
|
|
|
|
|
|
|
|
SWITCH CANOPY PULLCHAIN 1P BRS - Case of 10
|
|
|
UL listed (file no.E18704). Meets all CSA requirements, C22.2 no.111. For use in fixtures, appliances and equipment. Shank is threaded 15/32 in - 32 x 15/32 in long. Keyed shank, hex nut and finishing nut furnished. 6 wire lead terminals, number 18, stripped 3/4 in. With end bell.
|
|
|
|
|
|
|
|
|
|
SWITCH CANOPY PULLCHAIN 1P NIC - Case of 10
|
|
|
UL listed (file no.E18704). Meets all CSA requirements, C22.2 no.111. For use in fixtures, appliances and equipment. Shank is threaded 15/32 in - 32 x 15/32 in long. Keyed shank, hex nut and finishing nut furnished. 6 wire lead terminals, number 18, stripped 3/4 in. With end bell.
|
|
|
|
