|
|
|
|
|
|
Halex 02101B Connector, 1/2 in Compression, Zinc
|
|
|
Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.
|
|
|
|
|
|
|
|
|
|
Halex 02301B Connector, 3/4 in Compression, Zinc
|
|
|
Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.
|
|
|
|
|
|
|
|
|
|
Halex 90401 Offset Nipple, 1/2 in, Zinc
|
|
|
Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved.
|
|
|
|
|
|
|
|
|
|
Halex 02110 Connector, 1 in Compression, Zinc
|
|
|
Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.
|
|
|
|
|
|
|
|
|
|
Halex 02905B Elbow, 90 deg Angle, 1/2 in Compression, Zinc
|
|
|
Zinc die-cast. Concretetight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 deg bend is required and a pipe bending tool is not used. UL, CSA listed.
|
|
|
|
|
|
|
|
|
|
Halex 02210 Coupling, 1 in Compression, Zinc
|
|
|
Use to join two lengths of EMT conduit together. Zinc. UL, CSA approved.
|
|
|
|
|
|
|
|
|
|
Halex 90402 Offset Nipple, 3/4 in, Zinc
|
|
|
Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved.
|
|
|
|
|
|
|
|
|
|
Halex 02112 Connector, 1-1/4 in Compression, Zinc
|
|
|
Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.
|
|
|
|
|
|
|
|
|
|
Halex 90291 Elbow, 90 deg Angle, 1/2 in Compression, Zinc
|
|
|
Zinc die-cast. Concretetight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 deg bend is required and a pipe bending tool is not used. UL, CSA listed.
|
|
|
|
|
|
|
|
|
|
Halex 90292 Elbow, 90 deg Angle, 3/4 in Compression, Zinc
|
|
|
Zinc die-cast. Concretetight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 deg bend is required and a pipe bending tool is not used. UL, CSA listed.
|
|
|
|
