|
|
|
|
|
|
Halex 96163 2-Hole Snap-On Conduit Strap, 1 in, Steel
|
|
|
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
|
|
|
|
|
|
|
|
|
|
Carlon Snap Strap E978DC-CAR 1-Hole Single Conduit Strap, 1/2 in, PVC
|
|
|
Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
|
|
|
|
|
|
|
|
|
|
Halex 96111 1-Hole Conduit Strap, 1/2 in, Steel
|
|
|
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
|
|
|
|
|
|
|
|
|
|
Halex 96780 Conduit Hanger, NO 0, Steel
|
|
|
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt.
|
|
|
|
|
|
|
|
|
|
Halex 96121 2-Hole Conduit Strap, 1/2 in, Steel
|
|
|
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
|
|
|
|
|
|
|
|
|
|
Thomas & Betts E977DC-CTN 2-Hole Conduit Clamp, 1/2 in Rigid/Non-Metallic
|
|
|
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
|
|
|
|
|
|
|
|
|
|
Halex 96151 1-Hole Snap-On Conduit Strap, 1/2 in, Steel
|
|
|
Indoor or outdoor applications. To support EMT conduit.
|
|
|
|
|
|
|
|
|
|
Halex 96161 2-Hole Snap-On Conduit Strap, 1/2 in, Steel
|
|
|
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
|
|
|
|
|
|
|
|
|
|
Halex 96781 Conduit Hanger, NO1, Steel
|
|
|
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt.
|
|
|
|
|
|
|
|
|
|
Halex 96213 1-Hole Cable Strap, 3/8 in, Steel
|
|
|
Steel, use to secure BX cable to wood, masonry or similar surface.
|
|
|
|
