|
|
|
|
|
|
Gardner Bender GET-3100 Voltage Tester, 80 - 250 V, Twin Probe
|
|
|
Test for presence of voltage in live circuits. Tests AC/DC voltage from 80-250 volts. The neon indicator glows when voltage is present and brightens as voltage increases. Insulated housing and 2 inch test leads. Built in pocket clip. Tests DC motors, switches and outlets. With detailed user instructions.
|
|
|
|
|
|
|
|
|
|
Cooper BP914 Circuit Tester, 90 - 600 V
|
|
|
For testing electric circuits from 90 to 600 volt. Detects presence of power on either AC or DC circuits. Identifies circuit conductors.
|
|
|
|
|
|
|
|
|
|
Gardner Bender GET-3202 Low Voltage Voltage Tester, 5 - 50 V, Twin Probe
|
|
|
Tests AC/DC voltage from 5-50 volt. Glows when voltage is present and brightens as voltage increases. Insulated alligator clip tests leads. UL Listed. Carded.
|
|
|
|
|
|
|
|
|
|
Gardner Bender GRT-3500 Outlet Tester, 110 - 120 VAC LED Display
|
|
|
Tests standard receptacles and extension cords to ensure proper wiring. Neon indicators give positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle or extension cord (110 /125 volt circuits). Tests for six circuit conditions: open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Yellow and red lights provides indication of circuit status or specifies wiring errors.
|
|
|
|
|
|
|
|
|
|
Gardner Bender GET-213HV High Visibility Dual Indicator Voltage Tester, 100 - 300 V
|
|
|
Large, dual, neon indicators acknowledge presence of voltage. Individual indicators for each voltage range assures reliability of testing. Probes snap on bottom of housing for single hand testing of outlets. Insulated leads and housing. Tests from 100 to 300 volt AC/DC. UL Listed.
|
|
|
|
|
|
|
|
|
|
Gardner Bender GET-3213 3-Way Heavy Duty Voltage Tester, 120, 240 and 277 VAC/VDC, LED Display
|
|
|
Three-way live circuit tester indicates 120, 240 and 277 volt AC. UL Listed.
|
|
|
|
|
|
|
|
|
|
GB-Gardner Bender CT6101 Continuity Testers
|
|
|
Tests for breaks in non-energized wires or cords. 360 degree visual indication. Durable, heavy-duty tip. Flexible lead with insulated alligator clip. Pocket clip. Operates from 2 AAA batteries (included).
|
|
|
|
|
|
|
|
|
|
Gardner Bender GCT-3304 Low Voltage Twin Probe Economical Continuity Tester, 36 in, ABS Plastic
|
|
|
Economy continuity tester, tests continuity in nonenergized circuits. Features 36" insulated lead with alligator clip end. Fully shielded indicator bulb lights to indicate continuity, Uses 2 AA batteries, not included.
|
|
|
|
|
|
|
|
|
|
Gardner Bender GFI-3501 Receptacle Tester, 120 VAC, 60 Hz, Black/Red
|
|
|
Tests ground fault breakers by overloading circuit and tripping GFCI. Plug tester into any ground fault receptacle (110-125 volt AC) and press black button to overload circuit. Tests for seven conditions; ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Yellow and red lights provide indication of circuit status or specify which wire is defective. Carded.
|
|
|
|
|
|
|
|
|
|
Gardner Bender GAT-3400 Automotive Circuit Tester, 6 - 12 VDC LED Display
|
|
|
Used to test DC voltage in automotive applications. Features 3' test lead with alligator clamp and 360 degree bright visual indicator. Durable ABS housing with pocket clip. Checks fuses in junction block, automotive circuits for voltage. Back probe connectors and sockets. No batteries required.
|
|
|
|
