Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS > BRASS FLARE FITTINGS
Choose a sub category:
BRASS FLARE - PLUGS BRASS FLARE - CAPS
BRASS FLARE - UNIONS BRASS FLARE - NUTS
BRASS FLARE - ADAPTERS BRASS FLARE - MALE CONNECTORS
BRASS FLARE - FEMALE CONNECTOR BRASS FLARE - ELBOWS
BRASS FLARE - TEES
Sort By:
1 2 3 ... 11
Anderson Metal 754014-06 Brass Flare Fittings
AMC 754014-06 Short Flare Nut, 3/8 in, 1000 psi, -65 TO 250 deg F, Brass
Our Price: $2.15

UPC individually bagged.
Anderson Metal 754042-05 Brass Flare Union
Anderson 754042-05 Tube Union, 5/16 in, Flared, Brass
Our Price: $2.25

UPC individually bagged.
BrassCraft 293M Half Union Adapter
BrassCraft 293M Half Union Adapter, 3/8 in, Flared X MIP, Rough
Our Price: $3.19

For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414.
BrassCraft 294F Half Union Adapter
BrassCraft 294F Half Union Adapter, 3/8 X 1/2 in, Flared X FIP, Rough
Our Price: $3.35

For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414.
Anderson Metal 754046-0502 Brass Flare Coupling
Anderson 754046-0502 Tube Coupling, 5/16 x 1/8 in, 45 deg Flared x FNPT, 1000 psi, Brass
Our Price: $3.45

UPC individually bagged.
Anderson Metal 754822-0606 Brass Flare Fitting
Anderson 754822-0606 Tube Adapter, 3/8 in, Flared x Compression, Brass
Our Price: $3.45

Anderson Tube Adapter, 3/8 in Nominal Size, Flared x Compression, Brass
Anderson Metal 54802-06 Brass Flare Fittings
Anderson 54802-06 Tube Union, 3/8 in, Flared, Brass
Our Price: $3.69

Two piece construction - nut and body. Use with copper, brass, aluminum, or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Resists mechanical pullout. Easy to disassemble and can be re-assembled many times with no effect on the seal. No flaring tool required. Primary uses fuel equipment, plumbing, gases refrigeration, and vacuum. UPC individually bagged.
BrassCraft PSSL-14 Gas Dryer Adapter
BrassCraft PSSL-14 Gas Dryer Adapter, 3/8 in, Flared X MIP, 0.5 psi, Brass, -40 TO 150 deg F
Our Price: $3.85

For 1/4" ID (3/8" OD) corrugated tube. For gas clothes dryer connections. Tapped 1/8" female pipe thread. 5.5"L x 3.8"W x .6"D
BrassCraft PSSL-16 Gas Supply Union
BrassCraft PSSL-16 Gas Supply Union, 3/8 X 1/2 in, Flared X MIP, 0.5 psi, Stainless Steel, -40 TO 150 deg F
Our Price: $4.19

For 1/4'' ID (3/8'' OD) corrugated tube. Recommended for gas clothes dryer connections. Use with SL or RSL Series connectors. Tapped 3/8'' female pipe thread.
Brass-Craft FU3-6 Pipe Union
Brass-Craft FU3-6 Pipe Union, 3/8 in, Flare, Brass, -65 TO 250 deg F, Rough
Our Price: $4.19

For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414.
   
 
1 2 3 ... 11