|
|
|
|
|
|
Easy Heat 10800 Self-Regulating Connection Kit, For Use With Freeze-Free Pipe Heating Cable, Plastic
|
|
|
For electrical power connection and end sealing of Freeze Free pipe heating cable.
|
|
|
|
|
|
|
|
|
|
Easy Heat Freeze Free EH38 Pre-Set Self-Regulating Thermostat Pipe Heating Cable, 125 VAC, 15 A, 3 - 10 deg C
|
|
|
Temperature regulator used with freeze free pipe cable. On at 38 degrees F. Off at 50 degrees F.
|
|
|
|
|
|
|
|
|
|
Easy Heat AHB Pipe Heating Cable With Thermostat, 1 in, 3 ft, 120 VAC, 0.2 A, 21 W
|
|
|
Temperature - controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing to -40. Pipe requires 1/2" non-flammable insulation such as fiberglass. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. 120 volts. 7 watts per foot. CSA listed.
|
|
|
|
|
|
|
|
|
|
Easy Heat AHB Pipe Heating Cable With Thermostat, 1 in, 6 ft, 120 VAC, 0.4 A, 42 W
|
|
|
Temperature - controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing to -40. Pipe requires 1/2" non-flammable insulation such as fiberglass. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. 120 volts. 7 watts per foot. CSA listed.
|
|
|
|
|
|
|
|
|
|
Easy Heat AHB Pipe Heating Cable With Thermostat, 1 in, 9 ft, 120 VAC, 0.5 A, 63 W
|
|
|
Temperature - controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing to -40. Pipe requires 1/2" non-flammable insulation such as fiberglass. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. 120 volts. 7 watts per foot. CSA listed.
|
|
|
|
|
|
|
|
|
|
M-D 04309 Pipe Heating Cable, 3 ft L
|
|
|
Designed to prevent water line freeze up. Ready to install, grounded cord and plug, thermostat controlled with pilot light. UL and CSA approved. Install on pipes, then wrap with pipe insulation.
|
|
|
|
|
|
|
|
|
|
Easy Heat AHB Pipe Heating Cable With Thermostat, 1 in, 12 ft, 120 VAC, 0.7 A, 84 W
|
|
|
Temperature - controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing to -40. Pipe requires 1/2" non-flammable insulation such as fiberglass. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. 120 volts. 7 watts per foot. CSA listed.
|
|
|
|
|
|
|
|
|
|
M-D 04325 Pipe Heating Cable, 6 ft L
|
|
|
Designed to prevent water line freeze up. Ready to install, grounded cord and plug, thermostat controlled with pilot light. UL and CSA approved. Install on pipes, then wrap with pipe insulation.
|
|
|
|
|
|
|
|
|
|
Easy Heat AHB Pipe Heating Cable With Thermostat, 1 in, 15 ft, 120 VAC, 0.9 A, 105 W
|
|
|
Temperature - controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing to -40. Pipe requires 1/2" non-flammable insulation such as fiberglass. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. 120 volts. 7 watts per foot. CSA listed.
|
|
|
|
|
|
|
|
|
|
Easy Heat AHB Pipe Heating Cable With Thermostat, 1 in, 18 ft, 120 VAC, 1.1 A, 126 W
|
|
|
Temperature - controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing to -40. Pipe requires 1/2" non-flammable insulation such as fiberglass. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. 120 volts. 7 watts per foot. CSA listed.
|
|
|
|
