|
|
|
|
|
|
Oatey Knock-Out 39100 Test Cap with Barcode, 1-1/2 in Connection, ABS, White
|
|
|
Oatey Knock-Out? Test Caps are a solvent weld test cap designed for use on Schedule 40 ABS or PVC DWV piping for testing up to 17 PSI or 40 head pressure. Knock-Out? Test Caps deep design provides strong, leak-free connection, while "tab" feature keeps hands free from solvent cement. Knock-Out? center of test cap can be removed with "tab" to prevent possible blockage in piping.
|
|
|
|
|
|
|
|
|
|
Oatey Knock-Out 39101 Test Cap with Barcode, 2 in Connection, ABS, White
|
|
|
Oatey Knock-Out? Test Caps are a solvent weld test cap designed for use on Schedule 40 ABS or PVC DWV piping for testing up to 17 PSI or 40 head pressure. Knock-Out? Test Caps deep design provides strong, leak-free connection, while "tab" feature keeps hands free from solvent cement. Knock-Out? center of test cap can be removed with "tab" to prevent possible blockage in piping.
|
|
|
|
|
|
|
|
|
|
Oatey Knock-Out 39102 Test Cap with Barcode, 3 in Connection, ABS, White
|
|
|
Oatey Knock-Out? Test Caps are a solvent weld test cap designed for use on Schedule 40 ABS or PVC DWV piping for testing up to 17 PSI or 40 head pressure. Knock-Out? Test Caps deep design provides strong, leak-free connection, while "tab" feature keeps hands free from solvent cement. Knock-Out? center of test cap can be removed with "tab" to prevent possible blockage in piping.
|
|
|
|
|
|
|
|
|
|
Oatey Knock-Out 39103 Test Cap with Barcode, 4 in Connection, ABS, White
|
|
|
Oatey Knock-Out? Test Caps are a solvent weld test cap designed for use on Schedule 40 ABS or PVC DWV piping for testing up to 17 PSI or 40 head pressure. Knock-Out? Test Caps deep design provides strong, leak-free connection, while "tab" feature keeps hands free from solvent cement. Knock-Out? center of test cap can be removed with "tab" to prevent possible blockage in piping.
|
|
|
|
|
|
|
|
|
|
ProSource TC-15 Test Cap, 1-1/2 in Connection, Capping Pipe Ends, PVC, Black, 1-1/2 in Pipe
|
|
|
This ProSource test cap is used for capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems.
|
|
|
|
|
|
|
|
|
|
FERNCO QC-101 Pipe Cap, 1-1/2 in Connection, Slip, PVC
|
|
|
Qwik Caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Made of flexible PVC, they are suitable for above-ground or under-ground use. To install, simply place over open end of pipe and tighten to 60 in lb of torque, always remember to hand tighten when installing on corrugated pipe.
|
|
|
|
|
|
|
|
|
|
ProSource TC-2 Test Cap, 2 in Connection, Capping Pipe Ends, PVC, Black, 2 in Pipe
|
|
|
This ProSource test cap is used for capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems.
|
|
|
|
|
|
|
|
|
|
FERNCO QC-102 Pipe Cap, 2 in Connection, Slip, PVC
|
|
|
Qwik Caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Made of flexible PVC, they are suitable for above-ground or under-ground use. To install, simply place over open end of pipe and tighten to 60 in lb of torque, always remember to hand tighten when installing on corrugated pipe.
|
|
|
|
|
|
|
|
|
|
Oatey 33400 Test Plug, 1-1/2 in Connection, Plastic, Red
|
|
|
Plastic mechanical plug designed to hold higher pressures. Used for plugging open ended piping as protection from dirt, dust or debris. Maximum allowed air is 5 psig.
|
|
|
|
|
|
|
|
|
|
FERNCO QC-103 Pipe Cap, 3 in Connection, Slip, PVC
|
|
|
Qwik Caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Made of flexible PVC, they are suitable for above-ground or under-ground use. To install, simply place over open end of pipe and tighten to 60 in lb of torque, always remember to hand tighten when installing on corrugated pipe.
|
|
|
|
