|
|
|
|
|
|
Superior Pump 94505 Shallow Well Jet Pump, 1/2 hp, 1-1/4 NPT Inlet, 1 in Outlet, 25 ft Suction Lift, 67 psi Inlet
|
|
|
Rugged cast iron pump body for durability. Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25' depth. 1-1/4 NPT suction, 1" discharge/ drive port, 67 psi maximum pressure, 12.5 gpm flow rate, 1 year warranty from Superior Pump.
|
|
|
|
|
|
|
|
|
|
Superior Pump 94515 Convertible Jet Pump, 1/2 hp, 1-1/4 NPT Inlet, 1 in Outlet, 25 ft Suction Lift, 58 psi Inlet
|
|
|
Rugged cast iron pump body for durability, Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25' depth. Can be used in deep well applications. 1-1/4" NPT suction, 58 psi maximum pressure, 9.9 gpm mas flow rate, 1" discharge/ drive port.Deep well conversion assembly included. 6.4/3.2 amps. 1 year warranty from Superior Pump.
|
|
|
|
|
|
|
|
|
|
Flotec FP4012-10 Shallow Well Jet Pump, 1/2 hp, 1-1/4 in NPT Inlet, 1 in NPT Outlet, 230/115 V, 60 Hz, 9.4 A
|
|
|
Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM. Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.
|
|
|
|
|
|
|
|
|
|
Flotec FP4212-08 Convertible Jet Pump, 1/2 hp, 1-1/4 in NPT Inlet, 1 in NPT Outlet, 115/230 V, 60 Hz, 9.9/4.95 A
|
|
|
Rugged cast iron construction. Superior performance at depths to water of 100' or less. 1/2 HP pumps up to7.9 GPM. 3/4 HP pumps up to 11.9 GPM. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP preset at 230V. Prewired pressure switch preset for 30/50 PSI operation. Self-priming after pump housing is initially filled. Built-in pressure regulator. CSA certified. Jet kit sold separately.
|
|
|
|
|
|
|
|
|
|
Flotec FP4022-10 Shallow Well Jet Pump, 3/4 hp, 1-1/4 in NPT Inlet, 1 in NPT Outlet, 230/115 V, 60 Hz, 6.1/12.2 A
|
|
|
Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM. Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.
|
|
|
|
|
|
|
|
|
|
Sta-Rite FSNCH-L Shallow Well Jet Pump, 1/2 hp, 1-1/4 in NPT Inlet, 3/4 in NPT Outlet, 115/230 V, Stainless Steel
|
|
|
Built-in shallow well jet has corrosion-resistant nozzle, venturi and check valve. Close-grained cast iron pump body and base. Built-in check valve to prevent accidental loss of prime. Dust-proof cover to protect all electrical components from dust and insects. Motor features stainless steel shaft, heavy-duty ball bearings, balanced rotor and insulated motor windings. Pre-set, pre-wired pressure switch for automatic operation when used with water system tank. Top or side discharge-simplifies installation. 1-1/4" NPT suction and 3/4" NPT discharge. Dual voltage 115/230V; factory set at 230V. Wiring diagrams are permanently affixed on each motor for easy field change to 115 volt. Pressure switch setting 30-50. CSA certified.
|
|
|
|
|
|
|
|
|
|
Wayne Pumps CWS50 Convertible Jet Pump, 1/2 hp, 1-1/4 in NPT Inlet, 3/4 in NPT Outlet, 120/240 V, 50 psi Case
|
|
|
1/2 HP and 3/4 HP cast iron convertible jet well pump. Assembled in the US with foreign and domestic parts. 3/4 in. NPT discharge with 1 1/4 in. NPT suction and 1 in. drive. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V). Pressure switch is pre-set at 30-50 PSI for automatic operation. Max flow rate of 408 GPH at 0 ft. (50 PSI/CWS50) and 462 GPH at 0 ft. (50 PSI/CWS75). Durable cast iron volute with dedicated priming port for volute filling. For wells 0 ft. - 90 ft. in depth. Jet assembly required (sold separately).
|
|
|
|
|
|
|
|
|
|
Flotec FP4222-08 Convertible Jet Pump, 3/4 hp, 1-1/4 in NPT Inlet, 1 in NPT Outlet, 230/115 V, 60 Hz, 6.19 A
|
|
|
Rugged cast iron construction. Superior performance at depths to water of 100' or less. 1/2 HP pumps up to7.9 GPM. 3/4 HP pumps up to 11.9 GPM. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP preset at 230V. Prewired pressure switch preset for 30/50 PSI operation. Self-priming after pump housing is initially filled. Built-in pressure regulator. CSA certified. Jet kit sold separately.
|
|
|
|
|
|
|
|
|
|
Flotec FP4032 Shallow Well Jet Pump, 1 hp, 1-1/4 in NPT Inlet, 1 in NPT Outlet, 230/115 V, 60 Hz, 9.6/19.2 A
|
|
|
Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM. Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.
|
|
|
|
|
|
|
|
|
|
Wayne Pumps CWS75 Convertible Jet Pump, 3/4 hp, 1-1/4 in NPT Inlet, 3/4 in NPT Outlet, 120/240 V, 50 psi Case
|
|
|
1/2 HP and 3/4 HP cast iron convertible jet well pump. Assembled in the US with foreign and domestic parts. 3/4 in. NPT discharge with 1 1/4 in. NPT suction and 1 in. drive. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V). Pressure switch is pre-set at 30-50 PSI for automatic operation. Max flow rate of 408 GPH at 0 ft. (50 PSI/CWS50) and 462 GPH at 0 ft. (50 PSI/CWS75). Durable cast iron volute with dedicated priming port for volute filling. For wells 0 ft. - 90 ft. in depth. Jet assembly required (sold separately).
|
|
|
|
