|
|
|
|
|
|
Simmons 450-5 Relief Valve, 1/2 in
|
|
|
Cast brass finish. Pressure only relief valve. Factory preset at 75 psi.
|
|
|
|
|
|
|
|
|
|
SharkBite EB75 Series 23000-0045 Pressure Regulating Valve, 3/4 in Connection, FPT, Iron Body
|
|
|
The EB75 is a compact, iron-body pressure reducing and regulating valve designed for installations where small size and economy are important. Because of the iron body, this valve is not recommended for use in potable water applications. The EB75 comes factory set at 45 psi but has an adjustment range of 10 to 70 psi. The valve also comes in a low-pressure range of 0-20 psi.
|
|
|
|
|
|
|
|
|
|
Apollo Valves 69ELF114 Reducing Valve, 3/4 in, FNPT, Bronze Body
|
|
|
Apollo Valves Reducing Valve, Nominal Size: 3/4 in, FNPT Connection, Operating Pressure: 400 psi, Media: Water, Body Material: Bronze, Dimensions: 3-5/8 in W x 5-1/2 in H, Temperature Rating: 180 deg F
|
|
|
|
|
|
|
|
|
|
SharkBite EB45 Series 23883-0045 Pressure Regulating Valve, 3/4 in Connection, Single Union x NPT, Bronze Body
|
|
|
The EB-45 Series is a lead-free one 1/2 cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve. The EB-45 is assembled using modular construction methods and features end connections threaded for both FIP and union in 1/2 in through 2 in sizes. The EB-45 is intended for use where supply line pressure does not exceed 300 psi (400 psi 1/2 in, 3/4 in and 1 in). The EB-45 pressure regulators are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10 to 70 psi without changing the spring. This regulator is suited for either cold or hot (to 180 deg F) water service.
|
|
|
|
|
|
|
|
|
|
SharkBite EB45 Series 23882-0045 Pressure Regulating Valve, 1/2 in Connection, Single Union x NPT, Bronze Body
|
|
|
The EB-45 Series is a lead-free one 1/2 cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve. The EB-45 is assembled using modular construction methods and features end connections threaded for both FIP and union in 1/2 in through 2 in sizes. The EB-45 is intended for use where supply line pressure does not exceed 300 psi (400 psi 1/2 in, 3/4 in and 1 in). The EB-45 pressure regulators are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10 to 70 psi without changing the spring. This regulator is suited for either cold or hot (to 180 deg F) water service.
|
|
|
|
|
|
|
|
|
|
Apollo Valves APXPRV34WG Pressure Reducing Valve with Gauge, 3/4 in Connection, PEX Barb, 15 to 75 psi Regulating
|
|
|
The Apollo 3/4 in bronze double union water pressure regulator with gauge sets a new standard in water pressure regulation. It is designed to reduce incoming water pressures to a safe level to protect plumbing fixtures and appliances. With simple adjustability and an instant read, color-coded dial to provide downstream pressure measurement, this valve solves all of the annoyances of pressure regulators from the past. It also assists in the control of pressure surges from entering the structure from the water main to further protect fixtures and appliances. Excessive high pressure within a plumbing system can cause damage over time. A pressure regulator should be installed after the main line to help protect plumbing. Featuring a superior flow rate, durable bronze construction and fitted with either Apollo PEX, Apollo expansion PEX brass barb unions or Tectite by Apollo push-to-connect ends, the 36ELF can be easily integrated into any piping system.
|
|
|
|
|
|
|
|
|
|
SharkBite EB45 Series 23155-0045 Pressure Regulating Valve, 1 in Connection, Single Union x NPT, Bronze Body
|
|
|
The EB-45 Series is a lead-free one 1/2 cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve. The EB-45 is assembled using modular construction methods and features end connections threaded for both FIP and union in 1/2 in through 2 in sizes. The EB-45 is intended for use where supply line pressure does not exceed 300 psi (400 psi 1/2 in, 3/4 in and 1 in). The EB-45 pressure regulators are supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10 to 70 psi without changing the spring. This regulator is suited for either cold or hot (to 180 deg F) water service.
|
|
|
|
|
|
|
|
|
|
Watts 3/4 LFN45BM1-U Pressure Reducing Valve, 3/4 in, NPT x NPT Female, Silicone Alloy Body
|
|
|
Series LFN45B lead-free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and serviceability without removing the valve from the line. Standard pressure setting is 50 psi with an adjustable range of 25 to 75 psi (172 to 517 kPa).
|
|
|
|
