Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > FASTENING > POWER HAMMER PINS
Sort By:
1 2 3 ... 6
PIN DRIVE SHANK .145IN 3/4IN
Blue Point Fasteners PD19F10 Drive Pin, 0.14 in Dia Shank, 3/4 in L, Plain
Our Price: $4.99

Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 3/4 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool more info
PIN DRIVE KNURLED.145IN 1/2IN
Blue Point Fasteners PD13PK Drive Pin with Plastic Washer, 0.14 in Dia Shank, 1/2 in L, Knurled
Our Price: $5.69

Blue Point Fasteners Drive Pin with Plastic Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, Knurled, 1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool more info
PIN DRIVE SHANK .145IN STD 1IN
Blue Point Fasteners PD25F10C Drive Pin, 0.14 in Dia Shank, 1 in L, Plain
Our Price: $5.99

Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 1 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool more info
PIN DRIVE 3/4IN L 0.3IN HEAD
DEWALT 50022-PWR Powder Actuated Pin, 0.145 in Dia Shank, 3/4 in L, Steel/Plastic
Our Price: $6.49

DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel/Plastic, Silver, 3/4 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools more info
PIN DRIVE 0.3IN HEAD 1IN L
DEWALT 50026-PWR Powder Actuated Pin, 0.145 in Dia Shank, 1 in L
Our Price: $7.99

DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, 1 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools more info
PIN DRIVE SHANK .145IN 1-1/2IN
Blue Point Fasteners PD38F10 Drive Pin, 0.14 in Dia Shank, 1-1/2 in L, Plain
Our Price: $7.99

Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 1-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool more info
FASTENING PIN GALV 0.3 X 3/4IN
Simpson Strong-Tie PDPA PDPA-75 Drive Pin, 0.157 in Dia Shank, 3/4 in L, Steel, Galvanized
Our Price: $8.69

The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation. more info
Ramset 1516A Drive Pin
Ramset 1516A Drive Pin, 0.145 in Dia Shank
Our Price: $9.99

Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in. more info
Ramset 1506 Drive Pin
Ramset 00747 Drive Pin, 0.145 in Dia Shank, 3/4 in L, Steel, Zinc
Our Price: $9.99

Ramset Drive Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel, Zinc, 3/4 in L, Suitable for: Remington, Bostitch, Hilti, Redhead, Ramset and Uniset Low Velocity Tools more info
Ramset 00810 Washered Pin
Ramset 00810 Washered Pin, 0.145 in Dia Shank
Our Price: $9.99

With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips and 25 cal discs. Shank diameter of 0.145 in. more info
   
 
1 2 3 ... 6