|
|
|
|
|
|
44 Magnum 48-20-7430 Hammer Drill Bit, 1/4 in Dia x 4 in OAL, 2 in Flute
|
|
|
Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal.
|
|
|
|
|
|
|
|
|
|
IRWIN 322017 2-Cutter Hammer Drill Bit, 1/4 in Dia, 6 in L, 4 in, SDS-plus Shank, Carbide Tip, Chrome Vanadium Steel
|
|
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
|
|
|
|
|
|
|
|
|
Bulldog HC2040 Rotary Hammer Drill Bit, 1/4 in Dia, 4 in L, (4) 2 in Flute, SDS Plus, S4L Shank Centric Point, Carbide
|
|
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
|
|
|
|
|
|
|
|
|
IRWIN 322002 2-Cutter Hammer Drill Bit, 5/32 in Dia, 6 in L, 4 in, SDS-plus Shank, Carbide Tip
|
|
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
|
|
|
|
|
|
|
|
|
IRWIN 322004 2-Cutter Hammer Drill Bit, 3/16 in Dia, 6 in L, 4 in, SDS-plus Shank, Carbide Tip
|
|
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
|
|
|
|
|
|
|
|
|
44 Magnum 48-20-7431 Hammer Drill Bit, 1/4 in Dia x 6 in OAL, 4 in Flute
|
|
|
Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal.
|
|
|
|
|
|
|
|
|
|
Dewalt DW5402 Hammer Drill Bit, 3/16 in Dia x 4 in OAL, Steel, 2 in Flute
|
|
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
|
|
|
|
|
|
|
|
|
Bulldog HC2041 Rotary Hammer Drill Bit, 1/4 in Dia, 6 in L, (4) 4 in Flute, SDS Plus, S4L Shank Centric Point, Carbide
|
|
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
|
|
|
|
|
|
|
|
|
Dewalt DW5417 Hammer Drill Bit, 1/4 in Dia x 6 in OAL, Steel, 4 in Flute
|
|
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
|
|
|
|
|
|
|
|
|
Bulldog HCFC2040 Full Head Rotary Hammer Drill Bit, 1/4 in Dia, 4 in L, (2) 2 in Flute, 3/8 in SDS Plus, X5L Shank
|
|
|
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
|
|
|
|
