|
|
|
|
|
|
DEWALT DWZCSB8 Pole Saw Replacement Bar, 8 in L Bar, 0.043 in, 3/8 in TPI/Pitch
|
|
|
This water-resistant 8 in pole saw bar is designed for ultimate durability. It fits 8 in chains on our cordless 20V MAX* pole saw (DCPS620). This bar is designed to cut smooth and fast with minimum kickback.
|
|
|
|
|
|
|
|
|
|
Milwaukee 48-09-3001 Chainsaw Guide Bar, 16 in L Bar, 0.043 in Gauge, 3/8 in TPI/Pitch, 56-Drive Link
|
|
|
The Milwaukee? 16 in chainsaw guide bar is to be used with the Milwaukee? M18 FUEL? 16 in chainsaw (2727-20) and 16 in chainsaw chain (49-16-2715). The bar length is 16 in, the pitch is 3/8 in low profile and the gauge is 0.043 in. The narrow kerf design delivers maximum efficiency for longer run time. The saw chain guide bar has a durable design and is weather-resistant for increased life.
|
|
|
|
|
|
|
|
|
|
DEWALT DWZCSB12 Chainsaw Bar, 12 in L Bar, 0.043 in, 3/8 in TPI/Pitch, For: DCCS620 12 in Cordless 20 V MAX Chainsaws
|
|
|
The durable and water-resistant 12 in chainsaw bar is designed to fit 12 in chains on our cordless 20 V max chainsaw (DCCS620). This bar is designed to cut smooth and fast with minimum kickback.
|
|
|
|
|
|
|
|
|
|
DEWALT DWZCSB16 Chainsaw Bar, 16 in L Bar, 0.043 in, 3/8 in TPI/Pitch, For: DCCS670 16 in Cordless 20 V MAX Chainsaws
|
|
|
This water-resistant 16 in chainsaw bar is designed for durability. It fits 16 in chains on our cordless 60 V max chainsaw (DCCS670). The bar is designed to cut smoothly and quickly with minimum kickback.
|
|
|
|
|
|
|
|
|
|
DEWALT DWZCSB18 Replacement Chainsaw Bar, 18 in L Bar, 0.05 in, 3/8 in TPI/Pitch
|
|
|
Shorten downtime when your chainsaw bar is broken or severely worn with this high-endurance 18 in. Replacement chainsaw bar. This water-resistant replacement piece was designed for long-term durability. It fits most 18 in chains and was engineered to produce less kickback while cutting.
|
|
|
|
|
|
|
|
|
|
Milwaukee 49-16-2755 Guide Bar, 20 in L Bar, 0.05 in, 0.325 in TPI/Pitch, 78-Drive Link
|
|
|
Our 20 in, 0.325 in pitch, 0.05 in ga guide bar is designed with a durable multi-rivet nose and 12 tooth design to withstand tough bore cutting applications. The narrow kerf bar offers more cuts per charge versus standard kerf bars to maximize battery efficiency. This bar is recommended for use with our M18 FUEL? 20 in dual-battery chainsaw (2827-22) and 20 in 0.325 in pitch, 0.05 in ga saw chain (49-16-2752) and fits chainsaws with a K095 tail mount and 20 in narrow kerf chains with the same pitch, gauge and drive links.
|
|
|
|
|
|
|
|
|
|
DEWALT DWZCSB20 Replacement Chainsaw Bar, 20 in L Bar, 0.05 in, 3/8 in TPI/Pitch
|
|
|
When your chainsaw bar is broken or worn beyond repair, cut idle time and maintain productivity with the hard-wearing 20 in replacement chainsaw bar. The solid steel, water-resistant bar was designed to be able to handle heavy-duty applications. Make quick cuts with low kickback as you tackle almost any sawing task with this replacement piece, which fits most 20 in chains.
|
|
|
|
|
|
|
|
|
|
Husqvarna 597 53 32???62 Replacement Bar, 18 in L Bar, 0.05 ga Gauge, 3/8 in TPI/Pitch, 62 -Drive Link
|
|
|
The gentle curve and small nose radius reduce the risk of kickback and facilitate good cutting control. Bars are epoxy-coated to protect against scratches and corrosion.
|
|
|
|
