|
|
|
|
|
|
Protec-Kote SDK-C262W-100 Weather Resistant Deck Screw 2-5/8 in, Stainless Steel
|
|
|
Flat bottom head, KTX square driver, Protec-Kote for strong protection against the elements, case-hardened steel, self-tapping tip.
|
|
|
|
|
|
|
|
|
|
Deck Jig KJD/DECKBIT Drill Bit Set
|
|
|
Designed for drilling concealed holes with the Kreg Deck Jig. Creates an unobtrusive hole on the edge of deck boards. Comes with an allen wrench and a rugged depth collar which controls the depth when drilling.
|
|
|
|
|
|
|
|
|
|
National Nail Camo Marksman Heavy Duty Hidden Edge Tool Fastener, Gray
|
|
|
Designed for installing treated lumber with Camo hidden fasteners only. Heavy duty, contractor-grade.
|
|
|
|
|
|
|
|
|
|
CAMO 345001 Deck Fastener Tool, 1 in or 2 x 5-1/4 in - 5-3/4 in Board
|
|
|
The Camo Marksman Pro is a heavy duty contractor grade tool. The Marksman Pro positions Camo deck screws to penetrate the deckboard. This tool easily adjusts to fit 5-1/4" - 5-3/4" deckboards, and clamps securely to the deckboard. Provides automatic 3/16" spacing between boards, and has dual screw guides that enable both sides of the board to be fastened to the joist with single tool placement.
|
|
|
|
|
|
|
|
|
|
Camo Marksman Pro-NB 0345015 Heavy Duty Deck Fastening System, 3-1/4 - 5 in Board
|
|
|
Heavy duty contractor grade tool. The Marksman ProNB positions CAMO deck screws to penetrate the deckboard. Easily adjusts to fit 3-1/4" to 5" deckboards, and clamps securely to the deckboard. Provides automatic 3/16" spacing between boards, and has dual screw guides that enable both sides of the board to be fastened to the joist with single tool placement.
|
|
|
|
|
|
|
|
|
|
National Nail Camo Marksman Pro X1 Heavy Duty Hidden Deck Tool, 1 in or 2 in X 5-1/4 in to 5-3/4 in Board
|
|
|
Marksman Pro is designed for multiple deck applications. For installation of treated lumber decks. The Pro-X1 is designed with a 1/16" spacer to allow the smallest of gaps between deck boards. Ideal for installation of wet treated deck boards that will shrink as they dry naturally.
|
|
|
|
|
|
|
|
|
|
Protec-Kote SDK-C262W-525 Weather Resistant Deck Screw 2-5/8 in, Steel
|
|
|
Flat bottom head, KTX square driver, Protec-Kote for strong protection against the elements, case-hardened steel, self-tapping tip.
|
|
|
|
|
|
|
|
|
|
Kreg KJDECKSYS Deck Jig System
|
|
|
Easy-grip handle gives a secure hold and complete control over joints. Three "Hardened Steel" drill guides keep specialized stepped bit and driver bit at the precise, optimal angle. Spacer rings ensure accurate deck board spacing for proper drainage and longer deck life. Works with 4/4 to 5/4 (3/4" to 1-1/8). Not designed for use with 2x material including 2x4s, 2x6s, 2x8s, etc. Includes Deck Jig, 100 Protec-Kote deck screws, 6" Deck Jig drill bit, 6" KTX square driver bit, (3) 5/16" and 1/4" spacer rings, (2) stop collars, an allen wrench, instructional DVD and carrying case.
|
|
|
|
|
|
|
|
|
|
Deckmaster DMG5CB Grooved Deck Clip, 1/5 in Spacing, Black
|
|
|
Securely grips deck boards locking them in place. The base of the clip makes gapping boards easy creating and even 1/5" gap between deck boards. Recommended for use with: Fiberon, TREX, Gossen, Kleer, Ipe Hardwoods, Abbaco Hardwood, Nyloboard, Latitudes, ChoiceDek, MoistureShield, Veranda, WeatherReady, EverNew, Duralift, ModernView, and any 1/8" grooved decking.
|
|
|
|
|
|
|
|
|
|
EB-TY 175-EBTYS Hidden Deck Fastener, For Use with Deck Boards, 3/32 in Spacing, Polypropylene
|
|
|
Ideal for 1"+ materials with 6" board width on 16" joist spacing. Economical, efficient and attractive fasteners are essentially invisible. All fastening work done from top side. Relieves stress caused by natural shrinkage of deck boards. Only one EB-TY and one screw required at each board/joist intersection. Affords easy deck resurfacing by eliminating nail pops. Corrosion-resistant trim head Swaneze stainless steel finish screws included. Formed from UV-resistant polypropylene; Deck Packs Contains: 175 EB-TYs, 190 screws (#7 x 2-1/2"), 12 IPE wood plugs.
|
|
|
|
