|
|
|
|
|
|
MiTek JL26IF-TZ Joist Hanger, 4-1/2 in H, 1-1/2 in D, 1-9/16 in W, 2 in x 6 to 8 in, Steel, Zinc, Face Mounting
|
|
|
Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. G-185 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes.
|
|
|
|
|
|
|
|
|
|
MiTek JL28IF-TZ Joist Hanger, 6-1/8 in H, 1-1/2 in D, 1-9/16 in W, 2 in x 8 to 10 in, Steel, Zinc, Face Mounting
|
|
|
Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. G-185 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes.
|
|
|
|
|
|
|
|
|
|
MiTek JDS26 Purlin Hanger, Steel
|
|
|
The JDS purlin hangers provide a convenient, flexible solution when attaching purlins together.
|
|
|
|
|
|
|
|
|
|
MiTek JUS210-2TZ Slant Joist Hanger, 9-1/8 in H, 2 in D, 3-1/8 in W, 2 in L x 10 to 14 in H, Steel, Zinc, Face Mounting
|
|
|
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 deg to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
|
|
|
|
|
|
|
|
|
|
MiTek ADTT-TZKT Deck Tension Tie Kit, Steel
|
|
|
Deck collapses are often caused by failure of the connection where the deck is attached to the main structure due to little or no lateral capacity. ADTT-TZ is an adjustable deck tension tie designed to effectively transfer the out of plane lateral loads of the deck to the house structure.
|
|
|
|
|
|
|
|
|
|
JOIST HANGER 2X4IN 20 GAUGE - Case of 50
|
|
|
G90 galvanizing finish.
|
|
|
|
|
|
|
|
|
|
JOIST HANGER 2X6-8IN 20 GAUGE - Case of 50
|
|
|
G90 galvanizing finish.
|
|
|
|
|
|
|
|
|
|
JOIST HANGER 2X8IN 18 GAUGE - Case of 50
|
|
|
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
|
|
|
|
|
|
|
|
|
|
JOIST ANGLE 1-1/2X1-1/4IN STL - Case of 100
|
|
|
Used to strengthen framing in various applications or to support joists where stirrup style hangers cannot be installed. Requires 10d x 1-1/2 nails for installation. Meets ICBO, SBCCI, BOCA - NER 505; L.A. City RR25303, DSA PA-076; and Dade County, FL 98-0421.06 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. 16 ga.
|
|
|
|
|
|
|
|
|
|
SLANT JOIST HANGER 2X8IN - Case of 50
|
|
|
The JUS hanger Series offers double shear nailing. USP's dimple allows for 30 to 45 deg nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails and faster installation.
|
|
|
|
