|
|
|
|
|
|
USP Lumber HPAHD22 Foundation Strap, 2-1/16 in, 2635 lb Uplift, 10 ga Steel, Galvanized
|
|
|
Designed to anchor wood framing to poured concrete, foundation straps tie mudsill, and stud simultaneously to the foundation. Single pour edge installation. G90 galvanized finish. Embedment 10". Requires 16d nails for installation. Meets ICC-ES ESR-2787 codes. 10 Gauge - 24-3/4"H1 x 10"H2.
|
|
|
|
|
|
|
|
|
|
Tz Mudsill Anchor 11-1/8in - Case of 50
|
|
|
For securing mudsills and framing into concrete slabs. Do not rely-on for securing concrete sections together between cold joints. Features split flange for nailing to both mudsill and stud for greater framing versatility. Use a minimum of 2 anchors per mudsill within 12" of the end of each section. Meets ICC-ES ESR-2787 codes For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
|
|
|
|
|
|
|
|
|
|
FNDTN STRAP 2-1/16X5-3/4IN GLV - Case of 10
|
|
|
Anchors wood framing to poured concrete foundations, ties mudsill and stud simultaneously to the foundation. Installed at edge of concrete prior to pouring by temporarily nailing to form. Not for concrete sections together between cold joints. G90 galvanizing finish. Meets ICC-ES ESR-2787 codes. For additional information including allowable loads, installations and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. 12 Gauge - 16-5/8"H1 x 6-3/8"H2.
|
|
|
|
|
|
|
|
|
|
FNDTN STRAP 2-1/16X48-1/4IN GV - Case of 10
|
|
|
Economical, 1-piece method of achieving a continuous load path from a 2x rim joist through concrete block to foundation. Effective for resistance against high wind or seismic forces. Requires a 6" embedment into concrete footings (foundation) when concrete is wet. Not for concrete sections together between cold joints. 2-1/4"CTC for all fastening holes, 22-1/8"L from top to bottom of fastening holes. G90 galvanizing finish. Meets NER 505 codes. 12 Gauge.
|
|
|
|
|
|
|
|
|
|
FNDTN STRAP 2-1/16X68-1/4IN GV - Case of 10
|
|
|
Economical, 1-piece method of achieving a continuous load path from a 2x rim joist through concrete block to foundation. Effective for resistance against high wind or seismic forces. Requires a 6" embedment into concrete footings (foundation) when concrete is wet. Not for concrete sections together between cold joints. 2-1/4"CTC for all fastening holes, 22-1/8"L from top to bottom of fastening holes. G90 galvanizing finish. Meets NER 505 codes. 12 Gauge.
|
|
|
|
